As noted in the comment above the callback invocation,
the URB's callback may free the URB, so any
operations, including updates, must occur before the callback.
Signed-off-by: Sherry Fan <sherryfan@microsoft.com>
`XhcFreeUrb` attempts to unmap `Urb->DataMap` after
`FreePool(Urb->Data)` has already been called in some cases, causing a
use after free. Change the ordering so `Data` is freed after `Unmap`and
only freed when appropriate.
Signed-off-by: Sherry Fan <sherryfan@microsoft.com>
Add SkipHceReenable and SkipLinkStartup flags to
the EDKII_UFS_HC_PLATFORM_PROTOCOL to support
using a UFS controller that has already been
initialized.
Signed-off-by: Bob Morgan <bobm@nvidia.com>
Add arunsbaskaran as reviewer for SecurityPkg: Tcg related modules and
UefiCpuPkg.
Remove rahul1-kumar as reviewer from SecurityPkg: Tcg related modules
and UefiCpuPkg.
Signed-off-by: Arun Subramanian Baskaran <arun.subramanian.baskaran@intel.com>
The entrypoint module should do this programmatically using resources
passed by the bootloader. Under UPL, bootloaders are expected to pass
such ranges in the FDT.
Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com>
This PPI is no longer used - the EHCI and XHCI host controller PEIMs
expose PEI_USB2_HOST_CONTROLLER_PPI instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
There are two versions of the USB host controller PPI, and only the
newer one, called PEI_USB2_HOST_CONTROLLER_PPI, is actually produced by
the EHCI and XHCI host controller PEIMs in EDK2. (The other PPI was only
produced by UhciPei which has been removed)
So remove all the conditionally executed code based on the distinction
between the two PPIs, and only support the newer one.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Remove the UHCI PEI module, which is unused (in edk2-platforms) and
obsolete. It also implements an older version of the USB host controller
PPI, which can be dropped from EDK2 entirely once this driver is gone.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
First, If there are multiple devices in DeviceList and are going to
remove the first device in the DeviceList, the DeviceList will be
cleared up with setting to NULL.
This is not the expected behavior, as it should keep the rest of the
devices in the DeviceList. DeviceList should point to the next device,
Dev->Next.
Second, there is a potential infinite while loop if TmpDev->Next not
equal to Dev. TmpDev should point to next device.
Signed-off-by: Hunter Chang <hunter.chang@intel.com>
Fedora 40, which is currently used as the base image for
the Linux jobs in the CI, is EOL.
Switch over to the Fedora 41 image (gcc 14).
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Add initial unit test for DxeImageVerificationHandler to
validate signature verification bypass for selected image types.
Signed-off-by: Alexander Gryanko <xpahos@gmail.com>
Currently when building NOOPT tests in MSVC, the linker cannot
pick the correct tolower for the host runtime. A small
workaround to make the build work in MSVC.
Signed-off-by: Alexander Gryanko <xpahos@gmail.com>
Added Google Mock test support for DevicePathLib.
Added OpenProtocol and CloseProtocol for UefiBootServicesTableLib
mock library.
Signed-off-by: Alexander Gryanko <xpahos@gmail.com>
MmCore ImageSize may be not page aligned, it will be converted to page
aligned for allocating MMRAM to hold MmCore image.
This patch is to call CreatMmHobList() with page aligned size of ImageSize,
otherwise ASSERT (IS_ALIGNED (Length, EFI_PAGE_SIZE)) in
MmIplBuildMmCoreModuleHob() will happen if the input MmCore ImageSize is
not page aligned.
Signed-off-by: Star Zeng <star.zeng@intel.com>
UefiDevicePathLib.inf consumes Boot Services in
MdePkg/Library/UefiDevicePathLib/DevicePathUtilitiesDxeSmm.c
- DevicePathFromHandle().
And so cannot be used by MM_STANDALONE drivers.
Instead, MM_STANDALONE drivers can use UefiDevicePathLibBase.inf
as the DevicePathLib of choice.
Cc: Sachin Ganesh <sachinganesh@ami.com>
Signed-off-by: Gowtham M <gowthamm@ami.com>
The file UefiDevicePathLibStandaloneMm.inf was reintroduced in [#3187] to
give downstream platforms time to transition to UefiDevicePathLibBase.inf
As nearly three years have passed since that change,
and downstream consumers have had sufficient time to migrate,
this library can now be safely removed.
Cc: Sachin Ganesh <sachinganesh@ami.com>
Signed-off-by: Gowtham M <gowthamm@ami.com>
As part of this PR [#3187],
MM_STANDALONE drivers should now map DevicePathLib to
UefiDevicePathLibBase.inf instead of UefiDevicePathLibStandaloneMm.inf,
as latter is being deprecated.
Cc: Sachin Ganesh <sachinganesh@ami.com>
Signed-off-by: Gowtham M <gowthamm@ami.com>
The ramdisk is modelled as an NVDIMM which have a naturally higher
alignment than 4K. Operating systems may wish to map NVDIMMs using large
pages, so force the allocation alignment to 2MB.
This change was tested using HTTP ramdisk boot, targeting a flat windows
image.
Signed-off-by: Aaron Pop <aaronpop@microsoft.com>
Mbedtls requires the use of strpbrk(), but it is currently
included in BaseCryptLib, which is not part of
BaseCryptLibMbedTls. To resolve this, add strpbrk() to
CrtWrapper.c, as BaseCryptLibMbedTls is not dependent
on OpensslLib.
Signed-off-by: HemaAnmisha <hema.anmisha.kalavakolanu@intel.com>
Mitigates CVE-2025-3770
Do not assume that IDT.limit is loaded with a zero value upon SMM entry.
Delay enabling Machine Check Exceptions in SMM until after the SMM IDT
has been reloaded.
Signed-off-by: John Mathews <john.mathews@intel.com>
Introduce EArchCommonObjMcfgPciConfigSpaceInfo as an alias for
EArchCommonObjPciConfigSpaceInfo.
The CM_ARCH_COMMON_PCI_CONFIG_SPACE_INFO object is utilized by both
the MCFG and ACPI SSDT PCIE generators. Assigning a unique configuration
object ID ensures the platform configuration driver supplies the correct data.
Signed-off-by: Abdul Lateef Attar <AbdulLateef.Attar@amd.com>
When using the FMMT FvHandler function, new padding size
should be calculated correctly comparing with origin ffs
and new ffs, else it will cause the binary size changes.
This patch is used to fix the bug.
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Move PcdSerialRegisterBase from [PcdsFixedAtBuild, PcdsPatchableInModule]
section to [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic,
PcdsDynamicEx] section to enable dynamic configuration.
Signed-off-by: Pranav V V <pranav.v.v@intel.com>
When register a root SMI handler, it is expected to use windows calling
convention for the SMI handler. This patch adds missing EFIAPI for the
SMI handler SmmSwDispatcher to avoid potential issue from Linux build.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Introduce Tpm2DeviceTableLib to generate SSDT table which describes
Tpm2 devices.
This dynamic table generation is controlled by PcdGenTpm2DeviceTable
which default value is FALSE.
When it is TRUE, the TPM2 device ssdt table is generated when TPM2 ACPI
table is generated.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
DTB address can be modified through the config table. Use
this address in dmem output.
EmbeddedPkg dependency added to
ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1CommandsLib.inf
and ShellPkg/ShellPkg.ci.yaml
Adds to: 42b0443599
("ShellPkg: UefiShellDebug1CommandsLib: Uefi Config Tables in Dmem.c")
Signed-off-by: Prachotan Reddy Bathi <Prachotan.Bathi@arm.com>
Add ArmTransferListLib as a library to platforms using
ArmVirtCloudHv.dsc and ArmVirtQemu.dsc.
Signed-off-by: Prachotan Bathi <prachotan.bathi@arm.com>
Populate the gArmTransferListPpiGuid with the TransferList
base address.
Place the Ppi at the end of the PpiList
For platforms with no TransferList support,
boot continues without any errors.
https://firmwarehandoff.github.io/firmware_handoff
Signed-off-by: Prachotan Bathi <prachotan.bathi@arm.com>
Capture TransferList address from register x3
Refer to section 3 of the FW Handoff Specification
https://firmwarehandoff.github.io/firmware_handoff
The TransferList header is present at the base address
captured by this variable.
For platforms with no TransferList support,
boot continues without any errors.
Signed-off-by: Prachotan Bathi <prachotan.bathi@arm.com>
ArmTransferListHobGuid holds TransferList base address
If there's no valid TransferList found, Guid HOB is not built,
boot progresses as usual.
Signed-off-by: Prachotan Bathi <prachotan.bathi@arm.com>
Capture TransferList address from register x3
Refer to section 3 of the FW Handoff Specification
https://firmwarehandoff.github.io/firmware_handoff
The TransferList header is present at the base address
captured by this variable.
For platforms with no TransferList support,
boot continues without any errors.
Signed-off-by: Prachotan Reddy Bathi <Prachotan.Bathi@arm.com>
Added functionality TransferList Library
TransferListVerifyChecksum - Verify TransferList CheckSum
TransferListCheckHeader - Check if TransferList header is valid,
return suitable opcodes validating the header
TransferListFindEntry - Find a specific entry on the TransferList
using the TagId
TransferListDump - Dump the contents of the TransferList header
and the entry headers
Signed-off-by: Prachotan Reddy Bathi <Prachotan.Bathi@arm.com>
To support TPM2 devices that operate over the FF-A specification using CRB
in the Tcg2Pei PEIM, add the Tcg2ConfigFfaPei PEIM to
detect the presence of such TPM2 devices.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
To support measurement and extend PCR in PeilessSec with
TPM device using FF-A over CRB, add Tpm2DeviceSecLibFfa for PeilessSec.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
This is preparation patch to add Tpm2DeviceSecLibFfa for SEC
used in PeilessSec.
In SEC phase, DynamicPcd used for cacahing TPM2 information
couldn't be used.
To resolve this, writes wrapper functions to get TPM2 information
so that in the wrapper functions used in SEC wouldn't use the
related DyanmicPcd.
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
