PcdStatusCodeUseSerial can be the dynamic PCD, which can't be used
in MM drivers. So, defines gMmStatusCodeUseSerialHobGuid HOB to
indicate StatusCode is reported via serial port or not. The value
shall match with the PcdStatusCodeUseSerial.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Produce StandaloneMM Entry/Exit Notify Protocol for PlatformHook.
This replaces the SMM core platform hook implementation in the
traditional SMM (Edk2\MdeModulePkg\Include\Library\SmmCorePlatformHookLib.h).
Unlike traditional SMM, Standalone MM prefers a more generic method to
perform platform-specific tasks before and after the SMI handler. Therefore,
it introduces the gMmEntryNotifyProtocolGuid and gMmExitNotifyProtocolGuid
protocols to notify the SMM entry and exit. This approach is more flexible
for the platform, eliminating the need to place all tasks in
PlatformHookBeforeSmmDispatch() and PlatformHookAfterSmmDispatch(), thus
platform code can depend on the protocol notification to perform
platform-specific tasks.
Signed-off-by: Diat Siah Yap <diat.siah.yap@intel.com>
Now that the X64 StandaloneMmCoreEntryPoint has been moved to
MdePkg, it can be removed from StandaloneMmPkg and consumed
from MdePpkg.
Signed-off-by: Oliver Smith-Denny <osde@microsoft.com>
On some Arm platforms the boot firmware volume passed in the HOB
by the secure world firmware (TF-A) is never freed and is always
mapped as read-only.
On such platforms the heap memory can be saved by disabling the
shadow copy of the boot firmware volume. This is useful as on
some platforms the amount of memory available is limited.
Therefore, introduce a PCD PcdShadowBfv that platforms
can configure to disable the shadow boot FV. This PCD is set to
TRUE by default.
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
StandaloneMmCpu driver is only used for Arm architecture and
StandaloneMmCoreEntryPointLib for Arm has specific implementation with
StandaloneMmCpu driver.
Move StandaloneMmCpu Driver and StandaloneMmCoreEntryPointLib for Arm
to ArmPkg.
Continuous-integration-options: PatchCheck.ignore-multi-package
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
The default ExtractGuidedSectionLib used by Standalone MM is the
implementation in EmbeddedPkg. However, the ExtractGuidedSectionLib
implementation in EmbeddedPkg builds HOBs to save the extract handler
information.
Since StandaloneMm is consumer of HOB, not a HOB producer, introduce
a StandaloneMmExtraGuidedSectionLib implementation that saves the
extract handler information in the ConfigurationTable.
This StandaloneMmExtraGuidedSectionLib can be used by MM_STANDALONE
and MM_CORE_STANDALONE modules.
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
This patch introduces a PI_MM_CPU_DRIVER_EP protocol to handle
Mmcommunication request based on the CPU driver.
Previously the CPU driver entry point was retrieved using the
gEfiArmTfCpuDriverEntryPoint HOB.
However, this practice is incorrect as StandaloneMM must be a HOB
consumer and not a HOB producer.
Therefore, remove the CPU entry HOB gEfiArmTfCpuDriverEntryPoint,
and replace it with the CPU driver entry protocol
EDKII_PI_MM_CPU_DRIVER_EP_PROTOCOL.
The EDKII_PI_MM_CPU_DRIVER_EP_PROTOCOL installed in
StandaloneMmCpuInitialize() will be used by the code in
Arm/StandaloneMmCoreEntryPoint.
This protocol is used like below:
+=====+
|StandaloneMmCore|
+=====+
|
CEntryPoint()
===================
|
ProcessModuleEntryPointList()
|
+--> StandaloneMmMain()
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| // Load StandaloneMmCpu driver which implements
| // CpuDriverEntryPoint used by DelegatedEventLoop().
| // and install the gEdkiiPiMmCpuDriverEpProtocolGuid.
--------------
|
... // Get CpuDriverEntryPoint implemented by
// StandaloneMmCpu driver with gEdkiiPiMmCpuDriverEpProtocolGuid
|
DelegatedEventLoop() // Handle request by delegating it to
// CpuDriverEntryPoint.
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Defer the dispatch of the remaining MM drivers once the CPU driver has
been dispatched.
In MmDispatcher, return immediately if the MM Entry Point was registered.
Then the MM IPL will reinvoke the MM Core Dispatcher. This is required
so MM Mode may be enabled as soon as all the dependent MM Drivers for MM
Mode have been dispatched.
Introduce a FeatureFlag PCD to control if MmDispatcher returns or not
when MmEntryPointPoint is registered. Default value is FALSE.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
MmCoreFfsFindMmDriver() is called recursively for encapsulation sections.
Currently this recursion is not limited. Introduce a new PCD
(fixed-at-build, or patchable-in-module), and make MmCoreFfsFindMmDriver()
track the section nesting depth against that PCD.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This change allows to build StandaloneMmPkg components for 32bit Arm
StandaloneMm firmware.
This change mainly moves AArch64/ source files to Arm/ side directory
for several components: StandaloneMmCpu, StandaloneMmCoreEntryPoint
and StandaloneMmMemLib. The source file is built for both 32b and 64b
Arm targets.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3235
The library for this header initially resided in StandaloneMmPkg
but moved to MdePkg and now this file is a duplicate of the header
file in MdePkg.
This change removes the header file from StandaloneMmPkg. More
details regarding the history of the library transitioning from
StandaloneMmPkg to MdePkg are below.
The following commit removed the library from StandaloneMmPkg:
d6253d2f9a ("StandaloneMmPkg: remove redundant
StandaloneMmDriverEntryPoint driver", 2019-03-11)
The following commits added the library class & instance to MdePkg:
7df4764e6a ("MdePkg: introduce standalone MM entry point
library class", 2019-01-14)
5866d49923 ("MdePkg: introduce standalone MM entry point
library implementation", 2019-01-14)
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The PCD PcdStandaloneMmEnable is unused, and shouldn't exist in the
first place since the value is implied by the context (it is never
valid to set it to FALSE for standalone MM or TRUE for traditional
MM). So drop it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
gEfiMmConfigurationProtocolGuid is already defined in MdePkg, so drop
the duplicate definition from StandaloneMmPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by "Yao, Jiewen" <jiewen.yao@intel.com>
